List of software that Works under JauntPE
List of software that Works under JauntPE
Please include a URL to the software and any special redirects or instructions for .ini files needed to get the software to work.
Foodfile at http://www.kelpiesoft.com/applib/foodfile/ works with no special redirects needed other than a standard .ini file
-
- Posts: 10
- Joined: Sat Mar 17, 2007 11:09 pm
(my two are already in TPFC, but leave a few reg entries. JPE fixes this up)
SysExporter
Just a normal ini file needed.
HelpNDoc Personal
Just a normal ini file needed.
SysExporter
Just a normal ini file needed.
HelpNDoc Personal
Just a normal ini file needed.
This too is in TPFC.
Process Explorer
Redirect the registry keys.
When you build the portable version, you may want to check "keep portable registry in memory" when you get to the step where you redirect the Registry keys, because it takes a lot of time to start up if you don't.
Process Explorer
Redirect the registry keys.
When you build the portable version, you may want to check "keep portable registry in memory" when you get to the step where you redirect the Registry keys, because it takes a lot of time to start up if you don't.
Hi,
Following programs work perfectly after converted with JauntePE.List includes one unexpected entry.Check out
Orbit Downloader
RegCleaner
Internet Window Washer
Windows Media Player 11
These programs are not working
Free Download Manager
Download Accelarator Plus
I will keep on adding to this list and if anyone wants to add to this list plz PM me.
Enjoy !!!
Jainendra
Following programs work perfectly after converted with JauntePE.List includes one unexpected entry.Check out
Orbit Downloader
RegCleaner
Internet Window Washer
Windows Media Player 11
These programs are not working
Free Download Manager
Download Accelarator Plus
I will keep on adding to this list and if anyone wants to add to this list plz PM me.
Enjoy !!!
Jainendra
Yes, Process Explorer works well with JauntePE, but I wasn't successful with Process Monitor. I redirected just the registry to memory. The first time procmon is run it works well, but all subsequent runs crash at startup with an MFC runtime error.and0629 wrote:Process Explorer
Redirect the registry keys.
I did redirect registry keys (keep in memory) for these two with File System redirect:
Foobar2000 from http://www.foobar2000.org/
It cannot find two of my plugins: single column uie and soundtouch even though they are in the components folder. Other than that, it runs fine. Not sure if there might be other plugins that might not work.
Wordweb from http://www.wordweb.info/
a bit tempremental. It needs wweb32.dll to be copied into the application folder from c:\windows. I had problem with wweb32.exe, so I use the wwnotray.exe instead. When you first launch it, it may ask for the wweb.ww3.
Foobar2000 from http://www.foobar2000.org/
It cannot find two of my plugins: single column uie and soundtouch even though they are in the components folder. Other than that, it runs fine. Not sure if there might be other plugins that might not work.
Wordweb from http://www.wordweb.info/
a bit tempremental. It needs wweb32.dll to be copied into the application folder from c:\windows. I had problem with wweb32.exe, so I use the wwnotray.exe instead. When you first launch it, it may ask for the wweb.ww3.
wordweb tray icon works ok for me on winxp sp2frazum wrote:I did redirect registry keys (keep in memory) for these two with File System redirect:
Wordweb from http://www.wordweb.info/
a bit tempremental. It needs wweb32.dll to be copied into the application folder from c:\windows. I had problem with wweb32.exe, so I use the wwnotray.exe instead. When you first launch it, it may ask for the wweb.ww3.
Code: Select all
[Registry]
Use=1
Data=.\Registry\%appname%.reg
[Filesystem]
Use=1
Data=.\File System\
[FilesystemExclude]
1=0
2=16
3=25
[RegistryExclude]
1=HKEY_CURRENT_USER\Software\Microsoft\DirectInput
2=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ComDlg32
3=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MountPoints2
4=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
5=HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam
6=HKEY_LOCAL_MACHINE\Software\Microsoft\Direct3D
7=HKEY_LOCAL_MACHINE\Software\Microsoft\DirectDraw
8=HKEY_LOCAL_MACHINE\Software\Microsoft\DirectInput
9=HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
10=HKEY_LOCAL_MACHINE\System\CurrentControlSet
The GodFather tag manager
The GodFather 0.71 beta2
freeware, yet advanced file manager for
mp3/ogg/mpc/ape/flac/aac/apl/wv/mp4/ofr/spx
http://users.otenet.gr/~jtcliper/tgf
freeware, yet advanced file manager for
mp3/ogg/mpc/ape/flac/aac/apl/wv/mp4/ofr/spx
http://users.otenet.gr/~jtcliper/tgf
Code: Select all
[Registry]
Use=1
Data=.\Registry\%appname%.reg
[Filesystem]
Use=1
Data=.\File System\
[FilesystemExclude]
; desktop
1=0
2=16
3=25
; my music
4=13
5=53
[RegistryExclude]
1=HKEY_CURRENT_USER\Software\Microsoft\DirectInput
2=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ComDlg32
3=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MountPoints2
4=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
5=HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam
6=HKEY_LOCAL_MACHINE\Software\Microsoft\Direct3D
7=HKEY_LOCAL_MACHINE\Software\Microsoft\DirectDraw
8=HKEY_LOCAL_MACHINE\Software\Microsoft\DirectInput
9=HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
10=HKEY_LOCAL_MACHINE\System\CurrentControlSet
Iconoid
Licence:Freeware
Description:
Iconoid is a Windows desktop icon manager.Make icon backgrounds transparent
JPE runtime ini:
Foxit PDF Editor v1.5
Licence: trialware
Description:
Foxit PDF Editor is a tool for modifying page contents in Portable Document Format (PDF) documents
JPE runtime ini
Licence:Freeware
Description:
Iconoid is a Windows desktop icon manager.Make icon backgrounds transparent
JPE runtime ini:
Code: Select all
[Registry]
Use=1
Data=.\Registry\%appname%_registry.reg
[Filesystem]
Use=1
Data=.\Filesystem
[RegistryExclude]
1=*
[RegistryInclude]
1=HKEY_CURRENT_USER\Software\SillySot
[RegistryIgnore]
[FilesystemExclude]
1=*
[FilesystemInclude]
;appdata folder
1=26
[FilesystemIgnore]
[ModuleExclude]
1=*
[ModuleInclude]
1=iconoid.exe
2=tr3dll.dll
Foxit PDF Editor v1.5
Licence: trialware
Description:
Foxit PDF Editor is a tool for modifying page contents in Portable Document Format (PDF) documents
JPE runtime ini
Code: Select all
[Registry]
Use=1
Data=.\Registry\%appname%_registry.reg
[Filesystem]
Use=0
[RegistryExclude]
1=*
[RegistryInclude]
1=HKEY_CLASSES_ROOT\PDFEdit.Document
2=HKEY_CURRENT_USER\software\Foxit Software Company
[ModuleExclude]
1=*
[ModuleInclude]
1=PDFEdit.exe
I read in another post that Redllar would like for people to post here to show interest in the program. If there was enough interest, he might consider making JauntePE Open Source...here's my contribution.
And this onePosted: Mon Jan 15, 2007 4:08 pm Post subject: Working Apps Reply with quote Edit/Delete this post
Redllar,
I wanted to let you know a few things.
First, I have been following PortableFreeware.com software update and forum in addition to emails to Andrew for more than 18 months now and it is THIS TRHEAD that finally motivated me to register in the forums. In fact, this is my first message.
You should be very proud of this program and the interest that it has generated.
Second, I wanted to let you know that I portablized the following applications which originally write to the registry and they seem to work perfectly.
IconsExtract v1.40 by NirSoft
Noiseware Commuity Edition v2.5 by Imagenomic
Foxit Reader v2.0 by Foxit Software
The Font Thing v0.80 by Sue Fisher
7-Zip v4.42 by Igor Pavlov
I will try to portablize some more complicated applications which also write files and folders such as AdAware, Wink, Miranda, VLC and Skype and post the results here.
Posted: Mon Jan 15, 2007 6:41 pm Post subject: Ad-Aware Reply with quote Edit/Delete this post
"Portablized" Ad-Aware works flawlessly. Ad-Aware normally only creates folders/files in %userprofile% and does not touch the registry so this was not a huge test, but it works.
Launching the program is a bit slower (like the other programs I tested above), but it is an acceptable delay knowing that it is keeping my system clean.
To be more specifc
To be more specific, I use El Salvador's ASuite 1.4 Open Source Software (OSS) portable menu (search this site) to pass arguments for using the following software:
7Zip - OSS file compression
http://www.7-zip.org/
Registry keys only.
command line:
7zFM_jauntePE.ini:
Wink 2.0 - avi and swf screen movement capture software (presentations)
http://www.debugmode.com/wink/
Registry keys only.
command line:
Wink_jauntePE.ini file (same as for 7Zip except for the following line):
Room Arranger 3.26 - Room decoration/interior and 2D simulator
http://www.aplusfreeware.com/misc/RoomA ... index.html
Registry keys only.
Same as above, just different registry key.
NSIS 2.29 - OSS Installer language used for many portableapps launchers.
http://nsis.sourceforge.net/Main_Page
Registry keys only.
Same as above, just different registry key.
AttoBench 2.02 - Storage device speed benchmarking tool (read and write)
Download: http://www.xcso.com/download2.htm (second green download button on the right side of the screen)
No registry entries, but writes one file to C:\Windows\bench32.ini on shutdown (thanks Redllar!)
Foxit Reader 2.0 - PDF viewer.
http://foxitsoftware.com/pdf/rd_intro.php
Registry keys only. No stray files.
I already mentioned this in my last post, but I found it funny that I could not get JPE to work with a space in the name of the exe file. I had to rename the file without the space. I don't know if this is an ASuite issue or a JPE issue. I suspect ASuite.
Basically, these programs work flawlessly because the program only writes a few settings to the registry and JPE more than successfully redirects the registry stuff to Data\Registry (folders that I create).
Now, I am moving on to more complicated things like redirecting only one file that is saved to C:\ for example -- nothing else. I think I know how to do this in the ini file, but will post when I get new applications up and running.
[Edit]
8/1 Updated websites for programs
8/1 Included AttoBench
8/1 Included more registry keys
8/1 Included reasons for non-portability
8/1 miscellaneous formatting cleanup
7Zip - OSS file compression
http://www.7-zip.org/
Registry keys only.
command line:
Code: Select all
$Drive\System\JauntePE\JauntePE.exe -R $Drive\utilities\7Zip\7zFM.exe
Code: Select all
[Registry]
Use=1
Data=.\Data\Registry\%appname%_registry.reg
[Filesystem]
Use=0
Data=.\Data\Files\
[RegistryExclude]
1=HKEY_CURRENT_USER\Software\Microsoft\DirectInput
2=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\BitBucket
3=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ComDlg32
4=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Discardable
5=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts
6=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MountPoints
7=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MountPoints2
8=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9=HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams
10=HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam
11=HKEY_LOCAL_MACHINE\Software\Microsoft\Direct3D
12=HKEY_LOCAL_MACHINE\Software\Microsoft\DirectDraw
13=HKEY_LOCAL_MACHINE\Software\Microsoft\DirectInput
14=HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\BitBucket
15=HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
16=HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings
17=HKEY_LOCAL_MACHINE\System\CurrentControlSet
[RegistryInclude]
1=HKEY_CURRENT_USER\Software\7-ZIP
[RegistryIgnore]
[FilesystemExclude]
[FilesystemInclude]
[FilesystemIgnore]
[ModuleExclude]
[ModuleInclude]
[SpecialFolders]
Wink 2.0 - avi and swf screen movement capture software (presentations)
http://www.debugmode.com/wink/
Registry keys only.
command line:
Code: Select all
$Drive\System\JauntePE\JauntePE.exe -R $Drive\Productivity\Wink\Wink.exe
Code: Select all
[RegistryInclude]
1=HKEY_CURRENT_USER\Software\Debugmode
http://www.aplusfreeware.com/misc/RoomA ... index.html
Registry keys only.
Same as above, just different registry key.
Code: Select all
[RegistryInclude]
1=HKEY_CURRENT_USER\Software\Adasoft
[RegistryIgnore]
1=HKEY_CURRENT_USER\Software\Adasoft
http://nsis.sourceforge.net/Main_Page
Registry keys only.
Same as above, just different registry key.
Code: Select all
[RegistryInclude]
1=HKEY_CURRENT_USER\Software\NSIS
2=HKEY_LOCAL_MACHINE\Software\NSIS
[RegistryIgnore]
1=HKEY_CURRENT_USER\Software\NSIS
2=HKEY_LOCAL_MACHINE\Software\NSIS
Download: http://www.xcso.com/download2.htm (second green download button on the right side of the screen)
No registry entries, but writes one file to C:\Windows\bench32.ini on shutdown (thanks Redllar!)
Code: Select all
[Registry]
Use=0
Data=.\Data\Registry\%appname%.reg
[Filesystem]
Use=1
Data=.\
[RegistryExclude]
1=*
[RegistryInclude]
[RegistryIgnore]
[FilesystemExclude]
1=*
[FilesystemInclude]
1=%36%\bench32.ini
[FilesystemIgnore]
[ModuleExclude]
1=*
[ModuleInclude]
1=%appname%.exe
[SpecialFolders]
36=.\
http://foxitsoftware.com/pdf/rd_intro.php
Registry keys only. No stray files.
I already mentioned this in my last post, but I found it funny that I could not get JPE to work with a space in the name of the exe file. I had to rename the file without the space. I don't know if this is an ASuite issue or a JPE issue. I suspect ASuite.
Basically, these programs work flawlessly because the program only writes a few settings to the registry and JPE more than successfully redirects the registry stuff to Data\Registry (folders that I create).
Now, I am moving on to more complicated things like redirecting only one file that is saved to C:\ for example -- nothing else. I think I know how to do this in the ini file, but will post when I get new applications up and running.
[Edit]
8/1 Updated websites for programs
8/1 Included AttoBench
8/1 Included more registry keys
8/1 Included reasons for non-portability
8/1 miscellaneous formatting cleanup