TAudioConverter
- loin2kolpotoru
- Posts: 279
- Joined: Fri Oct 09, 2009 11:20 am
Re: TAudioConverter
I think by default TAC should use the host system's temp folder & the users should have the option to change it if they want due to some reason.
Re: TAudioConverter
loin2kolpotoru wrote:I think by default TAC should use the host system's temp folder & the users should have the option to change it if they want due to some reason.
- Ditto.
Re: TAudioConverter
Great, thanks.ozok wrote:As @loin2kolpotoru said this bug is fixed in beta releases
Yes, with the default behavior should definitely be the system temp folder. The assumption should be that the fastest drive is the system temp, but that's not necessarily true anymore since a lot of flash-based media seem to be overtaking local storage in terms of speed. Additionally, other users will want to reduce the number of writes over time to flash media and may want to point to a magnetic-based media temp folder.ozok wrote:how should TAC handle temp files on portable version? ... Should there be an option to switch between these two options?
Thanks for asking
Re: TAudioConverter
Hi guys,
I thought you may want to test the new beta. I couldn't test it as much as I wanted but there you have it. It is ofc portable.
Beta build 2609 changes:
Downloads: https://bitbucket.org/ozok/taudioconver ... /downloads
I thought you may want to test the new beta. I couldn't test it as much as I wanted but there you have it. It is ofc portable.
Beta build 2609 changes:
There might be things I forgot to add here, you may refer to changelog.txt for further info.added: TTagger can now write tags to Vorbis and Opus
added: Default "Disc No" and "Disc Count" tag values are 1
added: If encoder exits with an exit code other than 0, it'll be added to log
added: Re-written cue sheet parser
added: An option to go to bug report page in bitbucket project page
added: GUID values will be used instead of numbers for temp files
added: Exit codes to TTagger
added: TTagger will now report tag writing outcome properly
added: Min/Max bitrate options for Ogg Vorbis
added: A log showing compression percentages
added: Overwrite option will be shown in summary list
added: Extra columns in file list and an option to hide/show them
added: Progress list item adding is done according to file overwrite option
added: Trimming is now millisecond based
added: New progress bars that work better when skinning is disabled
added: Info will be added to log if file's length was shorter/longer than threshold
added: Custom tag usage will be shown in main window summary
added: Pressing esc key will close windows
added: Default skin is "AutumnSky"
fixed: File check failed if file doesn't exist (huh?)
fixed: Artwork image size wasn't written for some tag types
fixed: A bug that caused wrong encoder to be selected for some cases
fixed: Renaming was done twice if encoding was successful
fixed: "Overwrite if exists" didn't work because older files were not deleted
fixed: Clicking on a cue sheet item in file list would show full file duration
fixed: Cue sheet items in progress list wasn't shown properly
updated: all tag libraries
Downloads: https://bitbucket.org/ozok/taudioconver ... /downloads
Re: TAudioConverter
Update 0.9.1 changes:
--0.9.1
-Added: Limited CUE Sheet support
-Added: CD ripper
-Added: Max. process count is now 16
-Added: Support for dcaenc (encoding to dts)
-Added: Tag support for APE, TAK and TTA (APEv2)
-Added: Tag support for FLACCL
-Added: Artwork support for WMA
-Added: ReplayGain support for AAC encoders, WavPack, FLAC Encoders, Musepack
-Added: New UI layout
-Added: New codec options window
-Added: Custom command line options for each encoder
-Added: New columns to file list and an option to hide them
-Added: Option to time-strech audio files (thx to hello_hello)
-Added: TAC automatically mixdowns multichannel sources to stereo for mp3 and AAC-HEv2(thx to hello_hello)
-Added: Option to send TAC to tray when encoding
-Added: Double clicking to tray icon will hide/show TAC
-Added: Portable/Installed and 32bit/64bit information will be added to mail body
-Added: Option to disable trimming
-Added: Option to ignore .cue files when adding files
-Added: FFProbe to show information about files
-Added: "Albumartist" is first fallback for "Artist" (thx to jkauff)
-Added: TAC will now use GUID for temp wav files to prevent problems with unicode file names
-Added: "No delay" options to qaac (thx to eahm)
-Added: Option to see codec options summary on main window (thx to whitezombie455)
-Added: Option to filter added files according to duration
-Added: TAC will use 64bit version of refalac when it's possible
-Added: Trimming is now milisecond based
-Added: An option to clear file list after encoding (thx to o-l-a-v)
-Added: Some options for FLAC and TAK (thx to ChronoSphere))
-Fixed: AAC files with ADTS header couldn't be opened
-Fixed: Artwork couldn't be written if copying tags was disabled
-Fixed: Open file dialog filter was broken
-Fixed: "Couldn't find/write to version.txt" errors
-Fixed: Summary for FLACCL was missing
-Fixed: Trimming didn't work for "Extract/Copy audio" (some formats aren't supported) (thx to kolpotoru)
-Fixed: "Index out of bounds" during encode
-Fixed: Huge memory leak when extracting embedded artwork
-Fixed: "Create folder tree" didn't work when file was from a network (thx to ChronoSphere)
-Fixed: TAC detected mp2 streams in video files as mp3
-Improved: Encoding starting speed
-Improved: "Same as source" option will be added to log
-Removed: All animations (minimize, restore etc)
-Updated: FFmpeg to latest shared build from ffmpeg.zeranoe.com/builds/
-Updated: QAAC and refalac to 2.33
-Updated: Opusenc to 0.1.8
-Updated: Wavpack to 4.7.0
-Updated: LossyWAV to 1.3.1g
-Updated: fdkaac to 0.5.1
-updated: MediaInfo to 0.7.67
-Updated: AlphaControls to 8.52 stable
Re: TAudioConverter
Thank you. Impressive changelog. I have updated the entry.ozok wrote:Update 0.9.1 changes:
My YouTube channel | Release date of my 13th playlist: August 24, 2020
Re: TAudioConverter
Hi, ozok. Thanks for releasing such a well thought and powerful audio tool -- let me greet you on behalf of the Internet at large...
Finally got down to testing TAC (build 0.9.1.2820, according to file properties) and so far, so good -- I'm quite impressed with the overall design, especially the choice of internal skins. Nonetheless, here are a few (minor) issues presented to me...
Finally got down to testing TAC (build 0.9.1.2820, according to file properties) and so far, so good -- I'm quite impressed with the overall design, especially the choice of internal skins. Nonetheless, here are a few (minor) issues presented to me...
- For the sake of consistency and easier management, NeroAAC files would be preferably located in 'NeroAAC' sub-folder of the existing 'Tools', instead of alongside the TAC executable (which, BTW, I only discovered after finding your answer at http://sourceforge.net/p/taudioconverte ... /2faf91ad/).
- As referenced in most codec settings, but completely new to me, could you please direct me to an authoritative reference on the use of LossyWAV?
- Last, but not least, I find that text on TAC interface buttons should be optional...
Re: TAudioConverter
Thanks guys, it's been a while since the previous update. I hope this version works well for all.
@Midas
-I have a few plans in mind for neroaac tools. I was planning to have an explanation about it in the help file I wanted to add to this release but it turned out to be quite a challenge for me. (I'm lazy that's the challenge)
-You can find detailed info about lossyWAV here: http://wiki.hydrogenaudio.org/index.php?title=LossyWAV Remember to activate "Extra codec options for lossyWAV" when you use it.
-If you mean the toolbar buttons (Add, CD Ripper, Trim etc) I can add this. I was planning to group interface options so this would make a fine addition.
Regards.
@Midas
-I have a few plans in mind for neroaac tools. I was planning to have an explanation about it in the help file I wanted to add to this release but it turned out to be quite a challenge for me. (I'm lazy that's the challenge)
-You can find detailed info about lossyWAV here: http://wiki.hydrogenaudio.org/index.php?title=LossyWAV Remember to activate "Extra codec options for lossyWAV" when you use it.
-If you mean the toolbar buttons (Add, CD Ripper, Trim etc) I can add this. I was planning to group interface options so this would make a fine addition.
Regards.
Re: TAudioConverter
ozok wrote:-I have a few plans in mind for neroaac tools. I was planning to have an explanation about it in the help file I wanted to add to this release but it turned out to be quite a challenge for me. (I'm lazy that's the challenge)
- (Join the club ) What I suggested would be an easy way out, for the time being...
ozok wrote:-You can find detailed info about lossyWAV here: http://wiki.hydrogenaudio.org/index.php?title=LossyWAV Remember to activate "Extra codec options for lossyWAV" when you use it.
- Thanks. I get it now -- and I think I'll pass, since it falls through my current digital audio packers use. When I go lossless, I want bit level fidelity; most of the time I just want standard & lossy for playback (mostly meaning MP3 LAME --standard).
ozok wrote:-If you mean the toolbar buttons (Add, CD Ripper, Trim etc) I can add this. I was planning to group interface options so this would make a fine addition.
- Correct (and great!). Thanks for the feedback.
- loin2kolpotoru
- Posts: 279
- Joined: Fri Oct 09, 2009 11:20 am
Re: TAudioConverter
TAC(0.9.1.2620) is unable to convert/extract audio from a video if the video has audio in ac3 format.
I have a suggestion please add a option in the setting menu for changing the location of the tac setting to be stored then we can download one installer and use it for both portable and non portable version something similar to the irfanview.
I have a suggestion please add a option in the setting menu for changing the location of the tac setting to be stored then we can download one installer and use it for both portable and non portable version something similar to the irfanview.
Re: TAudioConverter
loin2kolpotoru wrote:TAC(0.9.1.2620) is unable to convert/extract audio from a video if the video has audio in ac3 format.
- Have you tried Pazera Free Audio Extractor (http://www.portablefreeware.com/?id=2049) for that effect? It has worked flawlessly for me...
Re: TAudioConverter
I've noticed that problem too. I guess it appears when the said video file has a "Data" stream alongside with video and audio - I don't know what this "Data" stream is suppose to be. I fixed it and it'll be in the next release which I plan to release in a few days. I've also noticed some problems with embedded artwork, especially if the source is WMA. I've fixed these bugs too.
@Midas I was planning to add a function to TAC to search for neroaac tools inside it's folder, including subfolders so you could place them anywhere you want to.
@Midas I was planning to add a function to TAC to search for neroaac tools inside it's folder, including subfolders so you could place them anywhere you want to.
- loin2kolpotoru
- Posts: 279
- Joined: Fri Oct 09, 2009 11:20 am
Re: TAudioConverter
Thank you Looking forward to the fix but what do u think about adding a option to change the location of the setting to be stored so that one version can be used both as portable and non portable application?
function to TAC to search for neroaac tools inside it's folder, including subfolders so you could place them anywhere you want to will be a good additon.
Thank you Midas for the suggestion.
function to TAC to search for neroaac tools inside it's folder, including subfolders so you could place them anywhere you want to will be a good additon.
Thank you Midas for the suggestion.
Re: TAudioConverter
I don't think I'll add that loin2kolpotoru.
New version 0.9.2 changes:
New version 0.9.2 changes:
You may find download links here: http://taudioconverter.sourceforge.net/downloads.html--0.9.2
-Added: [General] Tag editor
-Added: [General] An option to specify the depth of the folders to be created in the output (thx to ChronoSphere)
-Added: [Lame/Mp3] Added tag fields "Composer", "Album Artist", "Album Artist Sort" and "Album Sort" (thx to o-l-a-v)
-Added: [Lame/Mp3] "Total Disc" and "Total Track" tags will be written
-Added: [General] An option to show/hide toolbar button captions (thx to midas)
-Added: [AC3] An option to disable "Dialogue Norm."
-Fixed: [General] Embedded arwork couldn't be extracted
-Fixed: [WMA] Couldn't get embedded artwork type
-Fixed: [General] Couldn't extract audio from some MPEG files
-Fixed: [Lame/Mp3] "Comment" tag wasn't written properly (thx to o-l-a-v)
-Fixed: [General] A bug where "Artist" couldn't be extracted from WMA files
-Updated: FDKAAC to 0.5.2
-Updated: AlphaControls to 8.53
-Updated: Monkey's Audio to 4.12
Re: TAudioConverter
Thank you. Entry updated.ozok wrote:New version 0.9.2 changes:
My YouTube channel | Release date of my 13th playlist: August 24, 2020